如果您對該產品感興趣的話,可以
產品名稱:
日本三和 SANWA鉗型萬用表
產品型號:
DCL10
產品展商:
SANWA日本三和
折扣價格:
0.00 元
關注指數:1187
產品文檔:
無相關文檔
SANWADCL10/DCL-10 日本三和 SANWA鉗型萬用表蘇州寶三電子工具有限公司現特價批發日本依夢達/今田牌、強力牌、中村牌,ASKER、西鐵城，孔雀牌/尾崎牌、得樂、遠藤、古里、必佳/東海牌、東日等工具。歡迎來電咨詢! 專線：0512-68285570,65820067 ,65820047-603 張小姐：15250089395
日本三和 SANWA鉗型萬用表
的詳細介紹
SANWADCL10/DCL-10 日本三和 SANWA鉗型萬用表
| DCL10交流電流鉗表參數和特點: |
0.01-60-100A交流量程 帶背光的ACA專用微型鉗 便于狹窄處使用的鉗型細磁芯 夾緊狀態確認標記 數據鎖定 自動關機(大約30分鐘) 采樣率: 數值 2次/秒 Designed as a small, easy-to-carry device that can be put in your pocket !
The full-auto range has been adopted to eliminate the need of selecting a range ! Slim jaws with width of approximately 9 mm are used to enable the user to easily clamp the conductive wire under measurement among densely routed conductive wires. ■ Back light has been adopted to use in the dark place. ■ A lever and buttons are laid out in positions where they can be handled with a single hand. ■ The use of a large data hold button with a good click feel enables the user to press the button even in an overhead or other location where the button is not viewable during measurement and to check the measured value later. ■ The use of a portrait type LCD with a backlight provided in the lower part allows the user to read the displayed value while holding the meter. ■ Its rear has been curved so that the clamp meter can be held comfortably in the palm. 
|